HobbyKing
TURNIGY BRUSHLESS 1/8 SCALE CAR POWER SYSTEM 2000KV/150A
| Continuous Current | 150A |
| Burst Current | 1080A |
| Resistance | 0.0002ohm |
| Dimension | 68 x 55 x 45mm |
| Weight | 150g |
| Model | 4074SL V2.0 |
| Max Current | 76Amp |
| Weight | 386g |
| Diameter | 40mm |
| Length | 74mm |
| Shaft length | 20mm |
| Shaft Diameter | 5mm |
| ESC | 1 x 150A |
| Motor | 1 x 4074SL (2000Kv) |
| Pinion Gear | 21T |
| Note | Motor color may vary. |
Suitable Car:, 1/5 or 1/8 on and off road., Battery:, 2-6 cells Lipo (6-18 cells NI-xx), BEC output:, 5.75V/3A switch mode buit-in, Motor type:, Sensorless and sensored brushless motors >3.5t, Kv:2000, Scale:1:8, Poles:4, Contents:,
An extremely powerful brushless system for any 1/8 scale truck, ...5 Reviews
HobbyKing
TURNIGY PARK450 BRUSHLESS OUTRUNNER 890KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 890kv |
| Max current | 14A |
| No load current | 8V/0.7A |
| Current capacity | 18A/15sec |
| Internal resistance | 0.20 ohm |
| Diameter of shaft | 4mm |
| Dimensions | 51x28mm |
Weight:, 67g (not including connectors),
Designed to provide reliable and clean power for 3D parkflyers. ...5 Reviews
HobbyKing
TURNIGY G25 BRUSHLESS OUTRUNNER 870KV
| RPM | 870kv |
| Max current | 32A |
| No load current | 10V/2.4A |
| Current capacity | 44A/15sec |
| Internal resistance | 0.03 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 78x35mm |
Battery:, 3~4 Cell /11.1~14.8V, Weight:, 193g (not including connectors),
Designed to be a direct swap out for your 25 ...5 Reviews
HobbyKing
TURNIGY AE-25A BRUSHLESS ESC
| Output | Continuous 25A, burst 35A up to 10 seconds. |
| Input Voltage | 2-4 cells lithium battery or 5-12 cells NIMH battery. |
| BEC | Linear 2A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 50mm (L) * 26mm (W) * 12mm (H). |
| Weight | 25g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews
HobbyKing
HOBBYKING AP03 4000KV BRUSHLESS MICRO MOTOR (3.1G)
| Lipo Range | 1~2S (3.7~7.4V) |
| Suggested prop | 3020 |
| Burst current (10sec) | 2.5A |
| Weight | 3.1g (including mount and wire) |
| Shaft | 1.5mm |
| Shaft length | 6mm |
| Dimensions | 13 x 10mm |
| Voltage | 7.4V |
| Current | 1.7A |
| Thrust | 61g |
Kv: 4000rpm/v, Max current: 2A, Test data:, 3020 prop (Recommended),
High quality micro motors. Precision wound with silver-copper wire and ...5 Reviews
HobbyKing
KB28-67-12XL 1900KV BRUSHLESS MOTOR (FIN)
| Shaft Size | ƒ³3.17mm?~12mm |
| Motor Dimensions | ƒ³28mm?~68mm |
| Weight | 249g |
| Idle current | 1.5A |
| Resistance | 0.0282 |
Kv: 1900, Max Amp: 35,
KB28-67-12XL Brushless Motor KB28-67-12XL5 Reviews
HobbyKing
FC 28-12 BRUSHLESS OUTRUNNER 1534KV
| Weight | 39g (with wire & sticker etc) |
| Shaft | 3mm |
| Motor Length | 46mm |
| Diameter | 28mm |
| Stator Size | 22x10mm |
| Suggested prop | 7x4 or 7x6inch |
| Voltage | 11.1v or 14.8v (3-4S) |
| Prop size | 7x4 |
| RPM | 12250 |
| Max Curr | 10.5A |
| Thrust | 580g (1.27lb) |
| Prop size | 7x6 |
| RPM | 11000 |
| Max Curr | 15.5A |
| Thrust | 730g (1.61lb) |
Kv: 1534RPM/V,
Tiny but mighty! A well made and nicely finished outrunner. ...5 Reviews
HobbyKing
TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 2500KV
| Model | 2218 |
| Cells | 2~4S |
| No load Current | 2.5A/10V |
| Max power | 500W |
| Weight | 67g |
| Shaft diameter | 3.17mm |
| Dimensions | 27.2 x 36.5mm |
| Recomended ESC | 2~4S/50A |
Turns: 5, Kv: 2500rpm/V,
This motor is specifically designed for the 450 helicopter range ...5 Reviews
HobbyKing
TURNIGY 450/500 H2223 BRUSHLESS OUTRUNNER 3500KV
| Model | 2223 |
| Cells | 2~3S |
| No load Current | 3A/10V |
| Max power | 600W |
| Weight | 82g |
| Shaft diameter | 3.17mm |
| Bolt holes | 16.5mm & 19mm |
| Dimensions | 27.2 x 42mm |
| Recomended ESC | 2~4S/50A |
Turns: 5, Kv: 3500rpm/V, Bolt thread: M3,
This motor is specifically designed for the 450/500 helicopter range ...5 Reviews
HobbyKing
HOBBYKING 2402 BRUSHLESS OUTRUNNER 2350KV
| Dimension | 41mm x 41mm (including mount) |
| Weight | 16g (kv2350) (Including connectors) |
| Diameter of shaft | F3mm |
| Lamination thickness | .2mm |
| Battery | 2S /7.4V |
| RPM | 2350kv |
| Max current | 5.5A |
| Current capacity | 9A/5sec |
| Internal resistance | 0.348ohm |
| Dimensions | 9x30mm |
| Thrust | 235g |
| Prop | 8040 |
| ESC | 10A |
| Max Current | 5.5A |
| Battery Type | 2S only |
5 Reviews
HobbyKing
5A 1S BRUSHLESS CONTROLLER
| Max Current | 6.2A(3 Sec) |
| Weight | 1.8g(without wires) |
| Dimensions | 22x13x3mm |
Working Current: 5A,
5A 1S Brushless Controller Spec.3 Reviews
HobbyKing
TURNIGY 1230 BRUSHLESS INRUNNER MOTOR 4500KV
| Diameter of shaft | 1.48mm |
| Length of front shaft | 8mm |
| Battery | 2 Cell 2S/7.4V |
| RPM | 4500kv |
| No load current | 7.4V/0.4A |
| Current capacity | 6A/15sec |
| Internal resistance | 0.473ohm |
| Dimensions | 12x30mm |
| Pull | 9400 |
| Prop | EP4040 |
| Max Current | 6.4A |
| Battery Type | 2S Only |
Dimension:, 30mm x 12mm, 38mm(with shaft), Weight:, 14.5g (kv4500) (not including connectors), Lamination thickness: ., Max current:6A, ESC:7A,
2mm Spec. Suited for Mini EDF or micro parkjets.5 Reviews
HobbyKing
KB28-47-08S 4900KV BRUSHLESS MOTOR
| Shaft Size | 3.17mm~12mm |
| Motor Dimensions | 28mm~48mm |
| Weight | 163g |
| Idle current | 2.8A |
| Resistance | 0.0095 |
Kv: 4900, Max Amp: 50,
KB28-47-08S Brushless Motor KB28-47-08S5 Reviews
HobbyKing
TURNIGY 540L V-SPEC INRUNNER W/ IMPELLER 810KV
| Diameter of shaft | 5mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 810kv |
| Max current | 50A |
| No load current | 2.1A |
| Internal resistance | 78.0ohm |
| Prop | 13x4, 12x6 |
| Max Current | 23A, 21.5A |
| Pull | 1350g, 1250g |
| Prop | 12x8, 13x6.8 |
| Max Current | 27.2A, 39A |
| Pull | 1700g, 2000g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 36mm x 58mm, 70mm(with shaft), Weight:, 108g (kv810) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
SCM 3223 900KV BRUSHLESS OUTRUNNER
| Max Eff | 80% |
| Max Current | 6 to 15A (over 73% efficiency) |
| Int. Resistance | 265mohm |
| 10v no Load current | .8A |
| Dimensions | 27.7 x 30mm |
| Shaft | 3mm |
| Weight | 57g |
| Model Size | up to 700g |
| Recommended Prop | 10x5 |
Kv: 900rpm/v,
Spec.3 Reviews